How To Hang A Large Frameless Mirror On Wall

Frameless mirrors have a clean and modern look that can make any room look more spacious and stylish. However, hanging a large frameless mirror can be a bit more challenging than hanging a framed mirror. Here are a few tips to help you get the job done right.

Determine The Right Height and Position

Before you start hanging your mirror, it's important to determine the right height and position. The ideal height for a mirror is at eye level so that you can see your reflection without having to look up or down. As for the position, you'll want to center the mirror on the wall and make sure it's level.

Clean The Wall and Mirror

Once you've determined the right height and position, it's important to clean the wall and mirror. This will help to ensure that the adhesive will stick properly. To clean the wall, use a damp cloth and mild detergent. To clean the mirror, use a glass cleaner and a soft cloth.

Mark The Wall

Once the wall and mirror are clean, you need to mark the wall where you want to hang the mirror. To do this, use a pencil to mark the center of the mirror and the top and bottom of the mirror. Then, use a level to make sure that the marks are level.

Apply The Adhesive

Now it's time to apply the adhesive. You can use either mirror mastic or construction adhesive. If you're using mirror mastic, apply a bead of adhesive to the back of the mirror, around the edges. If you're using construction adhesive, apply a bead of adhesive to the wall, around the marks you made earlier.

Hang The Mirror

Once you've applied the adhesive, it's time to hang the mirror. Carefully lift the mirror and place it on the wall, aligning it with the marks you made earlier. Press the mirror firmly against the wall for a few minutes to ensure that the adhesive bonds properly.

Allow The Adhesive To Dry

Once you've hung the mirror, allow the adhesive to dry completely before using it. The drying time will vary depending on the type of adhesive you used. Consult the manufacturer's instructions for specific drying times.