How To Replace Side Mirror Glass On Car

Replacing a cracked or broken side mirror glass is a relatively simple and inexpensive task that can be completed in about an hour. Here are the essential steps to follow:

1. Gather Materials

You will need the following materials to replace the side mirror glass:

New side mirror glass
Screwdriver
Pry bar or plastic spatula
Adhesive tape
Clean cloth

2. Remove the Old Glass

Using a screwdriver, remove the screws that secure the side mirror cap to the mirror housing. Carefully pry the cap off using a pry bar or plastic spatula. Locate the clips that hold the old glass in place and gently pry them open using the pry bar or plastic spatula. Remove the old glass from the mirror housing.

3. Clean the Mirror Housing

Use a clean cloth to remove any dirt or debris from the mirror housing where the new glass will be installed.

4. Install the New Glass

Align the new glass with the mirror housing and press it into place. Make sure that the glass is seated properly in the housing. Snap the clips back into place to secure the glass.

5. Reattach the Mirror Cap

Align the mirror cap with the mirror housing and press it into place. Secure the cap with the screws that you removed earlier.

Tips

Here are a few tips for replacing side mirror glass:

If the side mirror glass is heated, make sure that you disconnect the electrical connector before removing the old glass.
Be careful not to damage the mirror housing or the new glass when prying off the old glass.
Use adhesive tape to secure the new glass in place if the clips are not holding it securely.
Test the side mirror to make sure that it is working properly before driving.