Feit Led Mirror 24 X 32 Instructions

Feit Electric LED Mirror 24 x 32 Instructions

This article provides a comprehensive guide for installing and operating Feit Electric LED mirrors, specifically focusing on the 24x32 inch model. While the specific steps might slightly vary depending on the exact model, these instructions provide a general framework applicable to most Feit Electric LED mirrors of this size. Always consult the included instruction manual with your specific mirror for the most accurate guidance.

Safety Precautions

Prior to commencing any electrical work, ensure the power supply to the designated circuit is switched off at the main breaker panel. This crucial step prevents electrical shock and ensures personal safety. Verify the power is off using a non-contact voltage tester.

Working with glass requires careful handling. Wear appropriate safety gloves to protect hands from potential cuts. If the mirror becomes cracked or damaged during installation, immediately stop and consult a qualified electrician or contact Feit Electric customer service. Do not attempt to install a damaged mirror.

It is recommended to have a second person assist with the installation, especially when handling the mirror due to its size and weight. This helps prevent accidental dropping and potential damage to the mirror or injury to the installer.

Mounting the Mirror

The mounting process begins with carefully unpacking the mirror and inspecting it for any damage incurred during shipping. Lay the mirror on a soft, clean surface to protect its surface. Locate the mounting brackets attached to the back of the mirror. These brackets will be used to secure the mirror to the wall.

Using a level and a pencil, mark the desired location for the mirror on the wall. Ensure the location allows for proper clearance around the mirror for optimal viewing and functionality. The wall surface should be structurally sound and capable of supporting the weight of the mirror.

Depending on the specific model and wall type, appropriate wall anchors and screws may be required. Consult the provided instructions for the recommended hardware. If installing the mirror into drywall, use appropriate drywall anchors to provide secure mounting. Drill pilot holes at the marked locations and insert the wall anchors if necessary. Then, carefully align the mounting brackets on the back of the mirror with the wall anchors and secure the mirror to the wall using the provided screws.

Electrical Connections

Once the mirror is securely mounted, the electrical connections can be made. The Feit Electric LED mirror typically includes a pre-wired junction box attached to the back of the mirror. This junction box houses the necessary wiring for connecting the mirror to the power supply.

Connect the wires from the junction box to the corresponding wires from the house wiring. Typically, this involves connecting black to black (hot), white to white (neutral), and green or bare copper to green or bare copper (ground). Use wire connectors to secure the connections and ensure they are tight and properly insulated.

After completing the wiring, carefully tuck the wires into the junction box and secure the cover. Double-check all connections to ensure they are correct and secure before restoring power to the circuit.

Operating the Mirror

Feit Electric LED mirrors typically feature a touch sensor for controlling the integrated LED lights. The location and functionality of the touch sensor may vary depending on the specific model. Consult the included instruction manual for the exact location and operation of your mirror's features.

The touch sensor generally allows for turning the lights on and off, adjusting the brightness (dimming), and in some models, changing the color temperature of the light. Familiarize yourself with the specific functionalities of your mirror by referring to the provided instructions.

Maintenance and Cleaning

Regular cleaning is recommended to maintain the appearance and functionality of the Feit Electric LED mirror. Use a soft, damp cloth with a mild glass cleaner to wipe the mirror surface. Avoid using abrasive cleaners or harsh chemicals, as these can damage the mirrored surface and the LED lighting components.

Do not spray cleaning solutions directly onto the mirror surface. Instead, spray the cleaning solution onto the cloth and then gently wipe the mirror. This prevents liquid from seeping into the edges of the mirror or the touch sensor, potentially causing damage.

By following these instructions and consulting the manufacturer's provided manual, the installation and operation of the Feit Electric LED mirror can be a straightforward process. Remember to prioritize safety and double-check all connections before restoring power.