How To Install A Vanity Mirror With Lights

How to Install a Vanity Mirror with Lights

A vanity mirror with lights is a useful and stylish addition to any bathroom. It can provide you with bright, even illumination for tasks like applying makeup, shaving, or plucking your eyebrows. Installing a vanity mirror with lights is a relatively simple project that can be completed in a few hours. Here are the steps you need to follow:

Tools and Materials You'll Need:

Before you start, gather the following tools and materials:

Vanity mirror with lights
Screwdriver
Drill
Drill bit
Level
Pencil
Wire nuts
Electrical tape

Step 1: Choose the Location

The first step is to choose the location for your vanity mirror. It should be placed at a height that allows you to see yourself clearly when you're standing in front of it. You'll also need to make sure that there's enough space around the mirror so that you can move around comfortably.

Step 2: Mark the Holes

Once you've chosen the location for your vanity mirror, mark the holes where you'll need to drill. Use a level to make sure that the mirror is hung straight. Then, use a pencil to mark the location of the holes.

Step 3: Drill the Holes

Use a drill to drill the holes into the wall. The size of the drill bit will depend on the type of screws that you're using. Make sure that the holes are deep enough so that the screws can be inserted all the way.

Step 4: Mount the Mirror

Lift the vanity mirror onto the wall and align it with the holes that you drilled. Insert the screws into the holes and tighten them until the mirror is secure.

Step 5: Connect the Wires

If your vanity mirror has lights, you'll need to connect the wires to the power supply. Most vanity mirrors with lights come with a plug that can be plugged into a standard electrical outlet. However, if your mirror doesn't have a plug, you'll need to wire it directly to the power supply. To do this, you'll need to use wire nuts and electrical tape. Connect the black wire from the mirror to the black wire from the power supply. Connect the white wire from the mirror to the white wire from the power supply. Then, connect the green wire from the mirror to the ground wire from the power supply. Wrap electrical tape around each connection to secure it.

Step 6: Finish Up

Once you've connected the wires, turn on the power supply and test the lights. Make sure that the lights are working properly before you leave the room.