How To Install An Led Bathroom Mirror

How To Install An LED Bathroom Mirror

Here's a step-by-step guide on how to install an LED bathroom mirror: ### Tools and Materials - LED bathroom mirror - Measuring tape - Pencil or marker - Level - Drill - Screwdriver - Wire cutters - Electrical tape ### Step 1: Safety First - Turn off the power to the bathroom at the circuit breaker. - Remove the old mirror, if there is one. ### Step 2: Measure and Mark - Measure the distance between the center of the electrical box and the bottom of the mirror. - Mark this distance on the wall. - Use a level to ensure the mark is level. ### Step 3: Drill the Holes - Drill two holes into the wall at the marked distance. - The holes should be slightly larger than the screws that will be used to mount the mirror. ### Step 4: Install the Mounting Brackets - Insert the screws into the holes and tighten them until they are snug. - Hang the mounting brackets on the screws. ### Step 5: Connect the Wires - Connect the black wire from the mirror to the black wire from the electrical box. - Connect the white wire from the mirror to the white wire from the electrical box. - Connect the green wire from the mirror to the ground wire from the electrical box. - Cap the wires with electrical tape. ### Step 6: Hang the Mirror - Lift the mirror and hang it on the mounting brackets. - Tighten the screws on the brackets until the mirror is secure. ### Step 7: Turn on the Power - Turn on the power at the circuit breaker. - Test the mirror to ensure it is working properly. ### Step 8: Finishing Touches - Clean the mirror with a glass cleaner. - Adjust the mirror's angle, if desired. ### Tips - If you are not comfortable working with electricity, hire a licensed electrician to install the mirror. - Be sure to use the correct size screws and drill bit. - Do not overtighten the screws, as this could crack the mirror. - If the mirror is heavy, get someone to help you lift it.