How To Install Sliding Closet Doors With Mirrors

Sliding closet doors with mirrors are a great way to save space and add style to your bedroom or dressing room. They're also relatively easy to install, even if you're not a DIY expert. Here's a step-by-step guide to help you get the job done.

Tools and Materials You'll Need:

Sliding closet door kit

Drill

Screwdriver

Measuring tape

Level

Stud finder

Pencil

Step 1: Prepare the Door Opening

The first step is to prepare the door opening. This involves removing any existing doors or hardware, and making sure the opening is square and level. If the opening is not square, you may need to shim it out with plywood or drywall.

Step 2: Assemble the Door Frames

Once the door opening is prepared, you can assemble the door frames. The door frames typically come in two pieces, a top track and a bottom track. The top track is attached to the ceiling, and the bottom track is attached to the floor. Follow the manufacturer's instructions for assembling the door frames.

Step 3: Install the Door Frames

Once the door frames are assembled, you can install them in the door opening. Start by attaching the top track to the ceiling. Then, level the bottom track and attach it to the floor. Make sure the door frames are square and level before proceeding.

Step 4: Install the Doors

Now it's time to install the doors. The doors typically come with pre-drilled holes for the rollers. Insert the rollers into the holes, and then lift the doors into the door frames. Make sure the doors are level and square before proceeding.

Step 5: Adjust the Doors

Once the doors are installed, you need to adjust them so that they slide smoothly and evenly. This involves adjusting the rollers and the door stops. Follow the manufacturer's instructions for adjusting the doors.

Step 6: Install the Trim

The final step is to install the trim around the door frames. The trim will hide the raw edges of the door frames and give the doors a finished look. Follow the manufacturer's instructions for installing the trim.