How To Change Wing Mirror Glass Golf Mk7

How to Change Wing Mirror Glass on a Golf Mk7

Replacing a cracked or broken wing mirror glass on a Golf Mk7 is a relatively straightforward task that can be done with basic tools and a little bit of patience. This guide will walk you through the steps involved, from removal to installation, helping you to restore your vehicle's functionality and aesthetics.

1. Gather Necessary Tools and Materials

Before you begin, make sure you have the following items readily available:

New wing mirror glass:

Ensure that the new glass is specifically designed for your Golf Mk7 and matches the existing mirror type (heated, folding, etc.). *

Torx screwdriver:

The size needed will depend on the specific model year of your Golf Mk7, but typically it is a T20 or T25. *

Flathead screwdriver:

This is used to pry off the mirror cover. *

Clean cloth:

To wipe away any dust or debris. *

Optional: Plastic trim removal tools:

These can be helpful for removing the mirror cover without damaging it.

2. Prepare the Vehicle

To ensure a smooth and safe repair process, take the following precautions:

Park the vehicle on a flat surface and engage the parking brake.

Turn off the ignition and remove the key.

Open the door on the side where you will be working.

3. Remove the Wing Mirror Cover

The mirror cover is held in place by clips or small screws. To remove it, follow these steps:

Locate the clips or screws securing the mirror cover.

These are typically located around the perimeter of the cover. *

Use a flathead screwdriver or plastic trim removal tools to carefully pry off the cover.

Start at one corner and work your way around. Be gentle to avoid damaging the cover or the surrounding paint. *

Once the cover is loose, lift it off the mirror assembly.

4. Remove the Old Mirror Glass

The mirror glass is held in place by a retaining clip or frame. You may need a small flat-blade screwdriver or a similar tool for this step.

Carefully pry off the retaining clip or frame.

This may require some force, but be cautious not to damage any other components. *

Once the clip or frame is removed, the old mirror glass should detach easily.

5. Install the New Mirror Glass

Installing the new mirror glass is a simple procedure requiring proper alignment and secure placement.

Slide the new mirror glass into its designated position on the mirror base.

Ensure that it fits properly and is flush with the surrounding frame. *

Secure the mirror glass by placing the retaining clip or frame back in place.

Make sure it clicks into place correctly.

6. Reinstall the Wing Mirror Cover

With the new glass secured, now it's time to put the mirror cover back on.

Align the mirror cover with the mirror assembly.

Gently press the cover back into place.

You may need to use moderate pressure to ensure all clips or screws engage correctly. *

Check for any loose clips or screws to ensure the cover is properly secured.

7. Test the New Mirror Glass

After the installation is complete, it is essential to test the new mirror glass.

Adjust the mirror to your desired position and confirm that it functions properly.

Check that the mirror does not vibrate excessively when driving on the road.

Following these steps, you should be able to successfully replace your Golf Mk7's wing mirror glass. Always prioritize safety and take your time during the process. If you encounter any difficulties or are unsure about any step, it is best to consult with a qualified mechanic or seek professional assistance.